新闻

首页>新闻>内容

7常用斑马条码打印机纸张检测方法

2020年12月5日

斑马条码打印机以其卓越的性能和耐用的品质受到用户的青睐。大振条码将为您介绍7台常用斑马条码打印机各型号的工厂修复及试纸操作。


  1. Zebra 105SL Zebra Barcode Printer: Turn off, press and hold the three buttons feed, pause and cancel at the same time; turn on, when there is content on the display, let go, the barcode printer will automatically measure the paper.


恢复出厂设置:按“SETUP”两次,然后按“+”“-”翻页,找到“LOADDEFAULT”,然后按“SAVE”,条码打印机会自动送纸,恢复出厂设置,再次切换机器。


  2, ZebraS600 zebra barcode printer restores factory settings: Turn off, press PAUSE and FEED at the same time to turn on, about 3 seconds, press the MODE4 key four times to save the settings, then return to the printing mode, and then turn off the machine.


   Detection method: In the case of power on, press and hold the MODE button until the CALIBRATE (paper test indicator) is on, then press the FEED button.


3.ZebraZ400斑马条码打印机恢复出厂设置:关机,同时按住FEED+PAUSE键,约10秒后松开,打印机自动恢复出厂设置。纸测量方法:按住校准键打开,并释放校准后喂纸媒体的关键,很多纸出院,纸是出院后,把机器关掉,再打开它,和纸测量完成。


4.ZebraS4M斑马条码打印机测试条码打印头工作是否正常,是否有断针,打印头两侧压力是否平衡:刚打印完测试页就知道了,方法是先关闭条形码打印机,然后按下PAUSE键打开,等待约8秒放手,条形码打印机会自动打印出纸张,并检查打印的内容是否完好。恢复出厂设置:关闭机器,按住纸张输出按钮,同时打开暂停按钮。大约8秒后,放手,打印机将恢复出厂设置。


  5, Zebra110XiIII zebra barcode printer paper recognition method: first press the pause button, then press CALIBRATE.


  6. Zebra 105SE Zebra barcode printer paper testing: In the power-on state, press MODE three times, then press the FEED key, the printer will automatically perform paper testing.


  7, ZebraZ4M zebra barcode printer paper test: press and hold the pause button to turn on the machine. Whether the zebra barcode print head is broken: press and hold the pause button for 8 seconds and then release it, the barcode printer will print out a black bar code label paper, check whether there is a white line on the sticker, if there is generally it can be judged as broken If the needle is detected, the printed barcode may not be scanned.